The CAN H-Bridge device contains two independent H-Bridges with over-current and short circuit protection, capable of 10A continuous and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.
- Voltage range: 6V - 28V (12V and 24V automotive installations)
- Output current: 10A continuous, 30A peak
- 4 analogue (0-5V) / digital (35Hz - 200Hz PWM) inputs
- Output PWM: 12bit 3.9kHz
The CAN H-Bridge device can supply protected low side (GND) or high side (VBat) supply independently to each of the four outputs for bidirectional DC motor control. Low-side outputs can be PWM modulated on a per-bridge basis.
Typical use cases are:
- Power windows
- High-current electronic throttle body amplifier
The dual H-Bridge device must be programmed using a CAN interface. The ECUMaster USB to CAN, Kvaser, or Peak PCAN may be used.
What's in the box?
- Can H-Bridge Module
- 24 Position connector with terminals
Install manual here.
https://drive.google.com/file/d/1VJkfNq0sddsbAYfGwpV8XyRYBCvfJwFs/view
